What to do if my Brose e-Bike System Bicycle Accessories display shows error 10 (low battery voltage)?
If the Brose e-Bike system displays error code '10', indicating that the battery voltage is too low, charge the battery pack using the battery charger.
What to do if my Brose e-Bike System display shows error 11 (high battery voltage)?
If the Brose e-Bike system displays error code '11', indicating that the battery voltage is too high, switch off the system completely and then back on using the LED button on the battery pack. If the problem persists, contact your e-Bike dealer.
Why is my Brose Bicycle Accessories display not showing cycling data?
If the display unit isn't showing cycling data even when the e-Bike is moving, check the spoke magnet's position. Ensure the distance between the spoke magnet and the speed sensor on the chain stay is between 5 and 17 mm. Adjust the distance if needed.
What to do if the bike lights on my Brose e-Bike System Bicycle Accessories won't activate?
If the bike lights on your Brose Bicycle Accessories won't turn on, inspect the cable and plug connections. Ensure they are correctly and securely connected.
How to fix a Brose e-Bike System Bicycle Accessories system that won't turn on?
If the display unit or the Brose e-Bike System won't turn on, here are some things to check: * Press the LED button on the battery pack to see if it switches on. The LEDs of the charge level display on the battery pack should light up. If not, the battery pack may be defective. * Make sure the battery pack is correctly snapped into its mounting. Remove and re-insert it to ensure it's properly seated. * Ensure the battery pack is fully charged using the provided battery charger. * Check that the contacts of the battery pack and mounting are clean. If dirty, clean them with a soft, dry cloth. * Ensure the display unit is correctly snapped into its mounting. Remove and re-insert it to make sure it's seated correctly. * Check that the contacts of the display unit and mounting are c...
General safety guidelines for the drive unit, covering electric shock and injury risks.
Specifies the drive unit's application and general operating principles.
Guides on getting used to the system and details on motor profiles (Trekking, City, MTB).
Discusses factors affecting battery range, careful handling, maintenance, and cleaning.
Covers service intervals, transportation guidelines, and proper disposal methods.
Technical details including material number, dimensions, weight, voltage, and temperature range.
Crucial safety precautions and the unit's defined purpose.
Step-by-step guide for installing and detaching the display unit.
Covers switching on/off, standby modes, and automatic power-off.
Details displayed info, background lighting, and panel navigation.
Instructions for changing units, setting clock, and resetting trip data.
Explains assist levels and how to use the push-assist feature.
Details on managing the e-bike's lighting system.
Provides detailed technical data for the display unit and lighting.
Critical safety guidelines and the battery pack's designated purpose.
Instructions for fitting, removing, locking, and testing the battery pack.
Detailed steps for charging the battery pack, on and off the e-bike.
Explanation of how LEDs indicate the battery pack's charge status.
Describes Active/Deep Sleep modes and power reduction.
How to turn the battery pack on/off and guidelines for cleaning/storage.
Procedures for storage charging, transport regulations, and environmentally sound disposal.
Technical details of the battery pack, including technology and voltage.
Critical safety guidelines and the charger's specific purpose.
Steps for connecting the charger to mains and battery pack.
Instructions for charging and understanding LED status displays.
Guidelines for cleaning the charger and its proper disposal.
Technical details for charger models, including dimensions and output.
Addresses common symptoms like activation failure, data loss, and light issues.
Lists system error codes, descriptions, and recommended solutions.
Provides further error codes and troubleshooting steps for system issues.
General| Motor Type | Mid-drive |
|---|---|
| Nominal Voltage | 36 V |
| Weight | 3.9 kg |
| Battery Compatibility | Brose batteries |
| Power Output | 250 W |
| Compatibility | E-bikes |
| Connectivity | Bluetooth |
| Display Options | Brose Smartphone Hub |
To Next Page
