Why does my Brose Bicycle Accessories control unit not show trip data?
If the control unit for your Brose Bicycle Accessories isn't showing trip data even when the e-bike is moving, the magnet might not be correctly positioned. Check the magnet's placement, especially its distance from the speed sensor on the chain stay. The distance should be between 5 and 17 mm. Adjust if necessary.
How to fix lighting that won't activate on Brose Bicycle Accessories?
If the lighting on your Brose Bicycle Accessories cannot be activated, the lighting cable may be incorrectly connected. Check the wiring and plug-in connections, and correct them if necessary.
General| Manufacturer | Brose |
|---|---|
| Model | E41230 |
| Nominal Voltage | 36 V |
| Maximum Power | 250 W |
| Compatible Battery | Brose Battery |
Details on related documents and required reading materials.
Guidelines for understanding and keeping the user manual for future reference.
Identification and description of the various components shown in the manual.
Basic safety notices and instructions for safe use are summarized here.
Explains how safety and warning notices are presented and structured.
Details the classification of dangers based on signal words and symbols.
Steps for activating and deactivating the e-bike drive system.
Information regarding system status, including error messages.
Details on how the battery charge level is indicated on the display.
Overview of available menu options for system configuration.
Guidance for diagnosing and resolving common problems with the drive system.
Recommendations for safely transporting the e-bike and its components.
Guidelines for regular inspection and technical checks of the drive system.
Specifications and technical details of the control unit.
Official statement confirming compliance with European directives.
Information on contacting Brose dealers for support and service.
Details regarding the copyright and usage rights of the manual's content.
To Next Page
