Brose E 41227 User Manual (English)

Questions and Answers:

M
Mary YatesAug 1, 2025
What to do if my Brose Bicycle Accessories display unit won't activate?
- T
  Tracie WilsonAug 1, 2025
  If your Brose Bicycle Accessories display unit or drive system won't activate, check the following: * Ensure the battery is correctly clicked into the holder; remove and reinsert if necessary, making sure it's in the proper position. * Charge the battery fully using the supplied charger. * Clean the battery contacts and holder with a soft, dry cloth. * Check the display unit's plug connection to ensure it is properly connected. * Clean the display unit contacts and holder with a soft, dry cloth. * Check the cabling and connections on the drive unit, connecting them correctly if necessary.
H
hjohnsonAug 5, 2025
How to fix Brose Bicycle Accessories when battery reserve has been reached?
- C
  Cathy ScottAug 6, 2025
  If the battery reserve has been reached on your Brose Bicycle Accessories, charge the battery.
V
vtorresAug 10, 2025
What to do if a serious error «Flashing» has occurred with Brose Bicycle Accessories?
- A
  andersonperryAug 10, 2025
  If a serious error is flashing on your Brose Bicycle Accessories, check the speed sensor and the position of the spoke magnet.
H
heathkarenAug 14, 2025
How to solve speed sensor error in Brose Bicycle Accessories?
- F
  Felicia NewmanAug 14, 2025
  To address a speed sensor error in your Brose Bicycle Accessories, restart the system.
B
Brittney HerringAug 18, 2025
What to do if I get an «Alternating» error when charging my Brose Bicycle Accessories battery?
- H
  Holly LynchAug 19, 2025
  If you receive an alternating error while charging your Brose Bicycle Accessories battery, it may be due to temperature issues. Disconnect the battery and charger from the power source. Wait until the temperature of both returns to normal (between 0° and 45°). Then, reconnect them to the power source.
A
Amber GonzalezAug 23, 2025
How to fix brake lighting error on Brose Bicycle Accessories?
- A
  Andrew JamesAug 23, 2025
  If you're experiencing a brake lighting error on your Brose Bicycle Accessories, switch off the system completely. Check all cables and plugs on the front and/or rear lighting. Then, restart the system.
A
Allison WilsonAug 27, 2025
Why doesn't my Brose Bicycle Accessories display unit show trip data when the e-bike is moving?
- W
  William PageAug 27, 2025
  If your Brose Bicycle Accessories display unit isn't showing trip data while the e-bike is in motion, check the mounting of the spoke magnet, especially its distance to the speed sensor on the chainstay. The distance should be between 5 and 17 mm; correct it if necessary.