EasyManua.ls Logo

Brose E 41227 - Safety Advice; Intended Use; Product Description; Assembly

Brose E 41227
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Remote | Safety Advice 19ENG |
The user manual contains important
information about the use and settings of
Brose components.
This user manual is based on the standards
and regulations valid in the European Union.
Read the operating instructions, especially the
safety instructions, carefully in the following
chapter before using the Brose Drive System.
Failure to follow the instructions in the user
manual may result in serious injury or damage
to your e-bike. Keep the operating instructions
at hand for further use.
If you pass on the Brose components to third
parties, please always include the respective
user manual.
The term «e-bike» used in this user manual
relates to electric bikes, pedelecs and EPAC. It
is an electric bicycle with electronic assistance.
The term «battery» refers equally to mounted
down tube batteries, luggage carrier batteries
and batteries integrated in the frame.
The term «battery» is used synonymously for
rechargeable energy stores.
1. Safety Advice
The «Display Remote» control unit is only
suitable for use in a speed pedelec when
combined with a display unit such as the
«Central Display».
The «Display Remote» control unit is
part of the drive system of your e-bike.
Read and observe the safety advice and
instructions in this manual as well as in
all other instructions enclosed with the
e-bike. Only then is the safe use of the
e-bike possible.
Failure to comply with or observe the
safety advice and instructions may result
in electric shock, fire and/or serious injury.
Table of Contents
1. Safety Advice 19
2. Intended Use 21
3. Product Description 22
4. Assembly 23
5. Operation and Control 24
6. Troubleshooting 28
7. Service 31

Related product manuals