Brose E41230 - 23 Settings

25 | ENBrose Display Allround E41230 // Menu and settings
23 Settings
Language
Screens
Display
System
Information
Settings
BACK
Bluetooth
Fig. 8: Menu Settings
Calling the settings
· Press the  button for two seconds.
· Using the  /  buttons, select
Settings and confirm the selection
with the  button.
→ Settings is shown on the display.
The following settings and information
are available for selection in the Settings
menu:
Language
Selecting a language causes an
immediate change in the language
display.
Bluetooth
Additional devices can be connected via
the Bluetooth interface.
· For more information, contact your
e-bike manufacturer or an authorized
Brose dealer.
Screens
· Personal the trip information (trip
data) display. Select which data can
be displayed while cycling.
Display
· Adjustment of the display.
Automatic
› The display brightness and the
day-and-night driving display (white/
black) are controlled automatically
using the light sensor.
Brightness
› Control of the display brightness:
The display brightness can only
be changed if automatic control is
deactivated.
White/Black
› Switch between white and black
backgrounds.
Display Off
› The backlighting of the display is
turned off after 5 seconds of inacti-
vity. All e-bike and display functions
remain active. Press any key to turn
the backlighting back on.
Plain Design
› Change of the user interface
(Fig. 2,page17) .
System
· (see chap. 24 on page 26)
Information
· Information from your Brose Drive
System (e.g. Product Name and
Software Version).