21 | ENBrose Display Allround E41230 // Operation and control
17 Using the push assist
WARNING
Risk of accidents and injury!
There is a risk of injury if the push
assist is used improperly.
» Only use the push assist as an aid
when pushing your e-bike:
− When the push assist is activated,
the e-bike must be held securely
with both hands and the wheels
must be in contact with the ground.
− Do not use the push assist to
propel yourself while sitting on the
e-bike.
INFORMATION
Familiarize yourself with the function
and acceleration of the push assist
away from road traffic.
Only use the push assist as an aid when
pushing your e-bike.
The push assist accelerates the e-bike
without pedal assistance to a speed
specified by the e-bike manufacturer
(3 to 6 km/h).
kmh3
5
WALK
Fig. 4: Push assist (active)
Activate push assist
1. Press the button.
› The function is activated.
› PUSH- appears on the display.
2. Within 5 seconds, press and hold the
button for as long as you need the
push assist function.
› WALK appears on the display.
› Release the button to deactivate
the push assist.
Deactivating push assist
The push assist is deactivated as soon
as one of the following events occurs:
· If you release the button,
· the speed specified by the
e-bike manufacturer is exceeded
(3 to 6 km/h).
To Next Page
Loading...
