To Next PageTo Next PageWhat to do if my Brother 884-T78 power isn’t on?
If your Brother Sewing Machine isn’t powering on, check these potential causes: * Ensure the machine is properly plugged in. * Verify the foot controller is securely attached. * The machine may need to be cleaned and oiled.
What to do if the needle is not inserted correctly in my Brother Sewing Machine?
If the needle is not inserted correctly, and is bent or has a dull tip, reinsert it. You may also need to change the needle, clean the feed dog and bobbin case, or re-thread the machine.
Why does the thread get tangled on the wrong side of the fabric with my Brother 884-T78 Sewing Machine?
If the thread is tangling on the wrong side of the fabric, try re-threading the machine, cleaning the bobbin case and under the needle plate, and oiling the machine.
What to do if the bobbin thread is not passing correctly from the bobbin case in my Brother Sewing Machine?
If the bobbin thread isn't passing correctly from the bobbin case, try reinserting the bobbin properly, re-threading the machine, and cleaning the bobbin case and under the needle plate.
How to fix incorrect upper threading on Brother Sewing Machine?
If the upper thread does not run through the take-up spring, re-thread the machine properly. You can also pass the thread through the take-up spring correctly, or reset the bobbin case.
What to do if the hook of the needle threader doesn’t pass through the eye of the needle on my Brother 884-T78 Sewing Machine?
If the hook of the needle threader doesn’t pass through the eye of the needle, turn the handwheel to raise the needle, or check to make sure the hook isn’t bent.
General| Brand | Brother |
|---|---|
| Model | 884-T78 |
| Category | Sewing Machine |
| Language | English |
