43
3
Stitching across an open seam is called “fagoting”. It is used
on blouses and children's clothing. This stitch is more
decorative when thicker thread is used.
a
Use an iron to fold the two pieces of fabric
along their seams.
b
Baste the two pieces of fabric, separated by
about 4.0 mm (3/16 inch), onto thin paper or a
sheet of water-soluble stabilizer.
• If you draw a line down the middle of the thin
paper or water-soluble stabilizer, sewing is
easier.
a Thin paper or water soluble stabilizer
b Basting stitching
c 4 mm (3/16 inch)
c
Attach zigzag foot “J”.
d
Select stitch or .
e
Set the stitch width to 7.0 mm (1/4 inch).
• For details, refer to “Selecting a stitch”
(page 24).
f
Sew with the center of the presser foot aligned
along the center of the two pieces of fabric.
g
After sewing is finished, remove the paper.
Stitch Name
Pattern
Presser Foot
Pattern No.
100 stitches
model
80/90 stitches
model
60/70 stitches
model
50 stitches
model
40 stitches
model
30 stitches
model
20 stitches
model
Joining stitch
J 151514141414 -
J 16161515151514
J 171716161616 -
Shell tuck
stitch
J 13131212121212
Smocking
stitch
J1818-----
Satin scallop
stitch
N 14141313131313
Decorative
stitch
J 2222191919 - -
J 2323202020 - -
J 24242121 - - –
N
25 25 22 22 21 - -
N 262623232219 -
N 272724242320 -
N 28282525 - - -
N 2929262624 - -
N 30302727 - - -
Decorative
stitch
N 31312828 - - -
N3232-----
N3333-----
CAUTION
● Be sure to turn off the main power before
replacing the presser foot. Otherwise, injuries
may occur if the foot controller or (start/
stop button) is accidentally pressed and the
machine starts sewing.
Fagoting
To Next Page
Loading...
