Need help?Do you have a question about the Brother COMPAL GALAXIE and is the answer not in the manual?
General| Brand | Brother |
|---|---|
| Model | COMPAL GALAXIE |
| Category | Sewing Machine |
| Language | English |
Explains the meaning of symbols used in the manual for adjustments and operations.
Illustrates the mechanical components and their layout within the sewing machine.
Details the power transmission mechanisms for various movements of the sewing machine.
Shows the layout and location of electronic components within the sewing machine.
Describes the micro-computer control system and its integrated components.
Explains the role of the micro-computer in providing mal-warning voices for erroneous operations.
Details the control system for the main motor, focusing on stable revolution.
Explains the control mechanism for linear actuators used in pattern generation.
Instructions for removing the external components of the sewing machine.
Procedure for removing the cord reel unit.
Steps for removing the main and sub-printed circuit boards.
Guidance on the arrangement and removal of lead wires.
Instructions for removing the transparency display plate.
Detailed steps for safely removing the cord reel unit.
Procedures for correctly installing the cord reel unit.
Step-by-step guide for disassembling the transparency display plate.
Instructions for reassembling the transparency display plate in reverse order.
Procedure for setting the correct position of the shuttle hook.
Steps to adjust the needle bar to the correct height.
How to adjust the bobbin case holder bracket for proper function.
Adjustment procedure for the height of the presser bar.
Adjusting the feed dog to the correct height for fabric feeding.
Setting the correct position for rotation and needle position shutters.
Adjusting the timing of the brake for the feed regulator.
How to adjust the tension of the motor belt.
Procedure for adjusting the timing belt tension.
Adjusting the revolutions per minute (RPM) of the main motor.
Setting the correct speed for the needle to stop at.
Adjusting the needle to ensure it drops in the center of the needle hole.
Adjusting the maximum swing width of the needle for zigzag stitches.
Ensuring correct forward feeding for straight stitches.
Adjusting stitch lengths for super automatic patterns.
Setting the correct position for the buttonhole switch lever.
Adjusting the upper thread tension dial.
Adjusting the thread tension release mechanism.
Adjusting the lock lever position for the side-cutter.
Adjusting the lower and upper knives of the side-cutter.
Troubleshooting and adjustment for when the upper knife of the side-cutter fails.
Adjusting the side-cutter with guide plates A and B attached.
Information and usage guidelines for the needle threader.
Steps for exchanging the needle threader.
How to check the hook position relative to the needle threader.
Adjusting the hook position for the needle threader.
Troubleshooting and adjustments related to the power supply unit.
Diagnosing issues when the zigzag stitch LED does not light up.
Troubleshooting pattern selection mechanisms and display issues.
Adjustments and troubleshooting for the main motor's operation.
Addressing issues where the main motor fails to stop correctly.
Troubleshooting problems related to pattern generation and stitch accuracy.
Diagnosing why the mal-warning voice feature is not functioning.
To Next Page