Brother DCP-L2560DW - Initial Setup Procedures; Setting Date;Time and Adjusting Volumes

Initial Setup
Set the Date and Time
Related Models:
MFC-L2720DW/MFC-L2740DW
1
Press (Settings) > All
Settings > Initial Setup > Date
& Time > Date.
2
Enter the last two digits of the year
using the LCD, and then press OK.
3
Enter the two digits for the month using
the LCD, and then press OK.
4
Enter the two digits for the day using the
LCD, and then press OK.
5
Press Time.
6
Enter the time (in 24-hour format) using
the LCD, and then pressOK.
(For example: enter 19:45 for 7:45 PM.)
7
Press
.
Adjust the Ring Volume
Related Models:
MFC-L2720DW/MFC-L2740DW
1
Press (Settings) > All
Settings > General Setup >
Volume > Ring.
2
Press a or b to display the Off, Low,
Med, or High option, and then press the
option you want.
3
Press .
Adjust the Beeper Volume
When the beeper is on, the machine will beep
when you press a button, make a mistake, or
after you send or receive a fax. You can
choose from a range of volume levels.
1
Press (Settings) > All
Settings > General Setup >
Volume > Beep.
2
Press a or b to display the Off, Low,
Med, or High option, and then press the
option you want.
3
Press .
Adjust the Speaker Volume
Related Models:
MFC-L2720DW/MFC-L2740DW
1
Press
(Settings) > All
Settings > General Setup >
Volume > Speaker.
2
Press a or b to display the Off, Low,
Med, or High option, and then press the
option you want.
3
Press
.
1
General Information
7