Brother DCP-L8400DN Quick Setup Guide

Finish
Wireless Network Connection
Finish
[Recommended]
Temporarily use a USB cable
for easy setup.
Conguration using the CD-ROM (Windows
®
)
Conguration without using the CD-ROM (Windows
®
without CD-ROM drive or Macintosh)
5
Follow the on-screen instructions until
the Connection Type screen appears.
Follow the on-screen
instructions to continue
the installation.
NOTE:
If connection is unsuccessful, repeat this step.
Finish
Follow the on-screen
instructions to continue
the installation.
NOTE:
If connection is unsuccessful, repeat this step.
[Option]
Select if you do not have a USB cable.
Download the full driver and software package from the Brother Solutions Center.
(For Windows
®
) solutions.brother.com/windows
(For Macintosh) solutions.brother.com/mac
Print from your mobile devices using our free application “Brother iPrint&Scan”.
Connect the machine and wireless LAN access point/router from the machine's Touchscreen.
1.
Download “Brother iPrint&Scan" to start using your machine with mobile devices.
2.
solutions.brother.com/ips
Print using your mobile device
Select the specied SSID,
and then enter the Network key.
Press .
Press Setup Wizard. Press Yes to enable WLAN.
For USB Connection
For Wired Network Connection
Connect a network cable rst.
For Wireless Network Connection

Brother DCP-L8400DN Specifications

General

Brand	Brother
Model	DCP-L8400DN
Category	All in One Printer
Language	English