To Next Page

To Previous Page

Using Scanning Software

PageManager

9 (For Mac OS

X v10.4, v10.5, v10.6 and v10.7)

This program makes it easy to scan, share, and organize your photos and documents.

It helps you not only convert piles of paper into organized digitized files, but also lets you view, edit, send,

and back-up files in many formats.

To install PageManager

, see PageManager

9 Installation (For Mac OS

X v10.4, v10.5, v10.6 and v10.7)

uu page 19.

Refer to the “help” file included with this program for further use instructions.

Initial Setup with PageManager

Note

Calibration is a critical step in setting up your scanner. This process will balance the image quality between

your computer and the scanner unit. If at any time you switch the scanner to another computer then you

will need to reinstall the scanner driver and recalibrate the scanner.

Selecting Scanning Source

When using Presto! PageManager

9 for the first time you will need to define the Scanning Source this

application will be using. This also applies when switching to another scanner.

a Run the PageManager

9 application and select file in the toolbar menu.

b Under file pull-down menu choose the Select Source option, then your model.

Brother DS700D User Manual

Questions and Answers: