Brother GTX pro - Page 12

1
Installation
IMPORTANT
The ink pouch for use in the initial installation
should be sent in advance to the location where
to install the printer and stored indoor.
*If you use ink at extremely low temperature
when the outside temperature is low or in the
cold season, the ink becomes hard to flow
during ink installation.
 The following environmental requirements should be met:
Environment Temperature Humidity
Keeping your
printer
0°C (32°F) to
40°C (104°F)
20 % to 85 %
(no condensation)
Working
Environment
*1
10°C (50°F) to
35°C (95°F)
Recommended
Print Environment
*2
18°C (64.4°F)
to 30°C (86°F)
35% to 85 %
(no condensation)
Electrical
Requirements
Power
Power
Consumptions
―
Single-phase
100-240 V,
50/60 Hz
80 W
*1
: Environmental range where the printer can be operated.
*2
: Environmental range where sufficient printing quality can be
secured.
X0339
X0338
Checking the installation site
1
1
7
.7
in. (4
5
cm) or more
106.3 in. (270 cm)
or more
39.4 in. (100 cm)
or more
39.4 in.
(
100 cm
)
or more
133.9 in. (340 cm)
or more
35.4 in.
(
90 cm
)
or more
23.6 in.
(
60 cm
)
or more
39.4 in. (100 cm)
or more
15.7 in. (40 cm)
or more
Exhaust opening
Exhaust
Approx. 12.6 in. (32 cm)
34.1 in. (86.7 cm)
1.57 in.
(
40 mm
)
16.7 in.
(42.3 cm)