Brother GTX pro - SAFETY INSTRUCTIONS; Safety Indications and Their Meanings; Printer Safety Precautions and Notes

HEAT PRESS SETTINGS FOR PRE-TREATMENT DRYING
HEAT PRESS & TUNNEL DRYER SETTINGS FOR INK CURING
VERY IMPORTANT RULE
The Brother GTX pro should A LWAYS be left with Power ON
NEVER shut OFF the printer except if requested by the display message only!
Power is requested to perform the needed recirculation of the inks every day.
POWER
NEVER POWER OFF THE PRINTER!
Use Silicon Sheet on the heat press to cover the Pre-treatment and clean the surface every 5 T-shirts min.!
Check the REAL Temperature with a Probe or with Strips to be sure that you are safe for the washability!
3