DO NOT
TOUCH
1 46 2
35
CLEAN
Wiper Cleaning
!
TO BE DONE EVERY WEEK
Nozzle Guards Cleaning
!
TO BE DONE EVERY WEEK
8
> Do not empty remaining Cleaning
Solution from the Cleaning Cup in the
Maintenance station but in the Waste
Tank below the printer!
Both white plastic wipers [White & CMYK] should be
cleaned on both sides and tops with the Cleaning Stick T
dipped in Cleaning Solution.
Use the tip of the Cleaning Stick T
to clean under the teeth of the wiper
holder and remove the dried ink.
Be sure to use the Cleaning Stick T
separately for white ink and color ink!
R
Clean Stick
Wipe clean the 2 nozzle guards & with the Clean Stick R dipped in Cleaning
Solution. Same way to clean the metallic parts & of the printhead.
A very important place to clean is area between nozzle guard and nozzle plate.
Be sure NOT to touch the nozzle surface at all!
1
2
3
4
5
6
> Manually move the carriage to such
a position that you can perform the
cleaning with ease.
To Next Page
Loading...
