CHAPTER 1 GENERAL
1-11
•
Avoid using coated paper such as vinyl coated paper.
• Avoid using preprinted or highly textured paper.
• It is recommended to use labels or transparencies which are designed for use in laser
printers.
• Avoid feeding labels with the carrier sheet exposed, or the printer will be damaged.
•
Before loading paper with holes such as organizer sheets, be sure to fan the stack well.
• Do not use organizer sheets that are stuck together. The glue that is used might caused
damaged to the printer.
•
When printing on the back of pre-printed paper, if the paper is curled, be sure to straighten
the paper as much as possible.
•
Different types of paper should not be loaded at the same time in the paper cassette to
avoid any paper jams or misfeeds.
To Next Page
Loading...
