2006/05/30
APPENDIX D REFERENCE LIST OF MX-2000/4000/5000/7000 SERIES UNIQUE COMMANDS - 8
Explanation
• This operator selects the specified output tray and output mode.
• This operator is ignored when no tray is specified.
• The ‘1’ and ‘2’ parameters are executed for all output trays other than ones which are defined and protected
as mailboxes.
<Example>
(HL-2060)
This operator is registered in ‘statusdict’.
statusdict begin
0 setoutputmode
end
(HL-2460/3260/7050)
<</BROutbinMode 0>> setpagedevice
To Next Page
Loading...
