CHAPTER 1 ABOUT THIS PRINTER
1-20
2. Open the rear cover.
3. Send the print data.
4. Using both hands, set the width of the manual feed
paper guides to the envelope width.
5. Using both hands, insert the envelope into the
manual feed slot until the front edge of the envelope
touches the paper feed roller. Hold the envelope in
this position until the printer automatically feeds it in
a short distance, and then let go of the envelope.
✏ Note
8Insert the envelope into the manual feed slot with the side to be printed face up.
6. After the printer ejects the printed envelope, the printer will wait until you insert the
next envelope. Repeat Step 5 for each envelope you want to print.
7. After you finish the print job, close the rear cover.
To Next Page
Loading...
