NOTE FOR USING THIS PARTS REFERENCE LIST
1. In the case of ordering parts, it needs mentioning the following items:
(1) Code
(2) Q'ty
(3) Description
(4) Symbol ( PCB No., Revision , and Parts location mounted on the PCB.)
Note : No orders without Parts Code or Tool No. can be accepted.
< Example >
REF.NO. CODE Q’TY DESCRIPTION SYMBOL REMARK
Revision No.: marked on the main printed circuit board.
B48K056 – 201 A
Revision No.: marked on the power supply printed circuit board.
Rev. A
2. Design-changed parts :
If the parts are changed, any one of the following symbols is indicated in the REMARKS column.
CNG(cng) : The part is changed to a new part.
ADD(add) : The part is newly added.
DEL(del) : The part is deleted.
Symbol in capital letters indicates that the change is the latest one in the page.
3. The original of this list was made based on the information available in January 2003.
4. Parts are subject to change in design without prior notice.
(1)
(4)
(3)
(2)
Design change indication
Specification No .
Pattern alteration No.
Circuit board No.
Design change indication
(The first version has no sign.)
To Next Page
Loading...
