Brother HL-L2300D - Commands; Select Storage Device Command; (For HL-2060;2400 C;2400 Ce;3400 Cn;2460;3260 N;7050;2600 Cn;3450 Cn;6050;6050 D; 6050 DN Only)

APPENDIX B - FLASH/PCMCIA CARD COMMANDS - 5
3. COMMANDS
3.1 Select Storage Device Command
(For HL-2060/2400C/2400Ce/3400CN/2460/3260N/7050/2600CN/3450CN/
6050/6050D/6050DN Only)
Command
ESC CR ! 12358F Slot No
** Slot No = 1
Slot No = 2 (Slot No. 2 is not used for the HL-2460/3260N.)
Slot No = 3 (Internal HDD)
Default = 1
For HL-6050/6050D/6050DN
** Slot No = 1 (ATA flash memory Card.)
Slot No = 2 (Internal flash memory.)
Available Devices
F, A, H
Description
The card is specified and controlled by the following commands.
For the detailed information on specific card operation commands, refer to the following sections which
describe each command in detail.
Command
Physical Format
ESC CR ! 12340F
Logical Format
ESC CR ! 12341F
Save Primary Font
ESC CR ! 12343F
Save Secondary Font
ESC CR ! 12344F
Save by Type
ESC CR ! 12345F
Save Data
ESC CR ! 12347F
Save Image (Fixed Printing Location)
ESC CR ! 12348F
Execute Data
ESC CR ! 12349F
Save Image (Infixed Printing Location)
ESC CR ! 12350F
Delete All Download Fonts
ESC * c 1028F
Delete Download Fonts of Specified ID
ESC * c 1026F
Save Download Fonts of Specified ID
ESC * c 1029F
Delete All Macros
ESC & f 1030X
Delete Macros of Specified ID
ESC & f 1036X
Save Macros of Specified ID
ESC & f 1038X
Copy Card
ESC CR ! 12357F
Default value is 1 (slot 1). The card is reset to the default value under the following circumstances:-
1) When the printer is turned on.
2) When the printer is reset on the control panel.
Error
N/A