Brother HL-L2361DN - RF Exposure Notice (USA or Canada only); RF Exposure Guidelines; Wireless Connection (Mexico only); Operation Conditions

To Next Page

To Previous Page

Troubleshooting

Enabling/Disabling AirPrint using Web Based Management

(web browser) A

A standard web browser can be used to enable and disable the machine's AirPrint feature (it is enabled by

default).

a Confirm that the machine is connected to the same network as the computer.

b Open the web browser on your computer.

c Type “http://machine's IP address/” into your browser’s address bar (where “machine's IP address” is

your machine’s IP address).

 For example:

http://192.168.1.2/

NOTE

Your machine’s IP address is visible on its control panel under the Network menu. For more information,

see your Brother machine's Online User's Guide on your model’s Manuals page on the Brother Solutions

Center at http://support.brother.com/.

d If you have set a login password for Web Based Management, type the password in the Login box, and

then click .

e Click Network.

f Click Protocol in the left navigation bar.

g To disable AirPrint, deselect the AirPrint check box.

To enable AirPrint, select the AirPrint check box.

h Click Submit.

i Restart your Brother machine.

Other manuals for Brother HL-L2361DN