Brother HL-L2361DN - CHAPTER 4 ADJUSTING AND UPDATING SETTINGS AS REQUIRED AFTER PARTS REPLACEMENT; IF YOU REPLACE THE MAIN PCB ASSY; IF YOU REPLACE THE LOW-VOLTAGE POWER SUPPLY PCB ASSY; IF YOU REPLACE THE LASER UNIT

Introduction
3
1
Infrastructure mode 1
Connect your mobile device to your Brother machine through a wireless access point/router.
 When the Brother machine is connected to the wireless access point/router using the machine's wireless
feature:
1 Mobile device
2 Wireless access point/router
3 Wireless network machine (your Brother machine)
 When the Brother machine is connected to the wireless access point/router using a network cable:
1 Mobile device
2 Wireless access point/router
3 Network cable
4 Wired or wireless network machine (your Brother machine)
3
2
1
4
3
2
1