Brother HL-L8250CDN - Disabling;Enabling Airprint Using Web Based Management (Web Browser)

Troubleshooting
9
A
Disabling/Enabling AirPrint using Web Based Management
(web browser) A
A standard web browser can be used to enable and disable the machine's AirPrint feature (it is enabled by
default).
a Confirm that the machine is connected to the same network as the computer.
b Open the web browser on your computer.
c Type “http://machine’s IP address/” into your browser’s address bar (where “machine’s IP address” is
the IP address of the machine).
 For example:
http://192.168.1.2/
NOTE
• You can see your machine’s IP address on the control panel’s network menu. For more information, see
your Brother machine's Software and Network User's Guide.
• If you have set a login password for Web Based Management, type the password in the Login box, and
then click .
d Click Network.
e Click Protocol.
f To disable AirPrint, deselect the AirPrint check box; to enable AirPrint, select the AirPrint check box.
g Click Submit.
h Restart the machine.