Brother HL-L8350CDW - Security Features

General Information
98
3
WLAN TCP/IP Boot Method Auto* / Static / RARP /
BOOTP / DHCP
Chooses the IP method
that best suits your
needs.
IP Address ###.###.###.###
(000.000.000.000)*
1
Enter the IP address.
Subnet Mask ###.###.###.###
(000.000.000.000)*
1
Enter the Subnet mask.
Gateway ###.###.###.###
(000.000.000.000)*
1
Enter the Gateway
address.
IP Boot Tries 0 / 1 / 2 / 3* / ... / 32767 Specifies the number of
attempts the machine
will try to obtain an IP
address when the Boot
Method is set to any
setting except Static.
APIPA On* / Off Automatically allocates
the IP address from the
link-local address
range.
1
IPv6 On / Off* Enables or Disables the
IPv6 protocol.
WLAN Assistant - - You can configure your
wireless network settings
using the Brother
CD-ROM.
Setup Wizard - - Configures the wireless
network settings using
the setup wizard.
WPS/AOSS - - Configures the wireless
network settings using
WPS or AOSS™
method.
WPS w/PIN Code - - Configures the wireless
network settings using
WPS with a PIN code.
Network for HL-L8350CDW and HL-L8350CDWT (continued)
Submenu 1 Submenu 2 Menu Selections Options Descriptions
The factory settings are shown in Bold with an asterisk.