Brother HL-L8350CDW - Page 106

General Information
99
3
WLAN
(Continued)
WLAN Status
(Appears only when
WLAN Enable is On
and Wired Enable
is Off.)
Status Active(11n) /
Active(11b) /
Active(11g) / Wired
LAN Active / WLAN
OFF / AOSS Active /
Connection Fail
Displays wireless
Ethernet link status.
Signal Strong / Medium /
Weak / None
Displays the signal
condition.
Channel - Displays the channel in
use when Status is
Active.
Speed - Displays the connecting
speed when Status is
Active.
SSID - Displays SSID [uses a
maximum of 32 digits
and characters 0-9, a-z
and A-Z in ASCII values]
Comm. Mode Ad-hoc /
Infrastructure
Displays the current
Communication Mode.
MAC Address - - Displays MAC address
of the machine.
Set to Default Restores wireless network settings of the internal print server to the
factory settings.
WLAN Enable - On / Off* Turns the wireless
interface on or off.
Wi-Fi Direct Push Button - - You can easily configure
your Wi-Fi Direct™
network settings using
the one-button push
method.
PIN Code - - You can easily configure
your Wi-Fi Direct™
network settings using
WPS with a PIN code.
Manual - - You can manually
configure your Wi-Fi
Direct™ network
settings.
Group Owner - On / Off Sets your machine as
the Group Owner.
Network for HL-L8350CDW and HL-L8350CDWT (continued)
Submenu 1 Submenu 2 Menu Selections Options Descriptions
The factory settings are shown in Bold with an asterisk.