To Next PageTo Next Page
Need help?Do you have a question about the Brother Innov-is 10 and is the answer not in the manual?
General| Stitch Number | 16 |
|---|---|
| Buttonhole Styles | 3 |
| Display | LCD |
| Weight | 5.5 kg |
| Type | Electronic |
| Speed Control | Yes |
| Free Arm | Yes |
| Needle Threader | Automatic |
| Presser Feet | Buttonhole foot, Zipper foot, Zigzag foot, Button fitting foot |
Prepare the bobbin and winding spindle for thread winding.
Wind thread onto the bobbin, ensuring correct tension and length.
Insert the wound bobbin into the bobbin case assembly.
Guide the lower thread through the bobbin case mechanism.
Place the assembled bobbin case into the sewing machine shuttle.
Pull the bobbin thread up through the needle plate.
Verify that the bobbin and lower thread are correctly positioned.
Adjust the tension of the lower thread if required for proper stitching.
Ensure the bobbin case is properly seated and secured.
Begin threading the sewing machine with the upper thread.
Perform a final visual check of the bobbin installation.
Prepare the sewing machine for threading the upper thread.
Guide the thread through the first tension disc.
Guide the thread through the take-up lever.
Guide the thread through the lower thread guides.
Guide the thread through the needle clamp.
Insert the thread through the eye of the sewing machine needle.
Pull the upper thread through the needle and guides.
Verify the upper thread is correctly threaded through all guides.
Ensure both upper and lower threads are ready for stitching.
Adjust upper thread tension as needed for desired stitch quality.
Perform a final check of the upper threading setup.
