LOWER/UPPER THREADING
30
f
While holding the thread from the spool with
both hands, pull the thread through the lower
notch in the thread guide plate, then through
the upper notch.
a Lower notch in the thread guide plate
b Upper notch in the thread guide plate
g
While holding the thread from the spool in
your right hand, hold the end of the thread
with your left hand, and then guide the thread
through the groove, following the arrows in
the illustration.
h
Guide the thread down, up, then down
through the groove, as shown in the
illustration.
a Upper thread shutter
a Upper thread shutter
b Thread take-up lever check window
i
Pass the thread through the needle bar thread
guide (marked “6”).
* Hold the thread with both hands and guide it as
shown in the illustration.
a
Needle bar thread guide
j
Pass the thread through the thread guide disks
(marked “7”).
* Make sure that the thread passes through the groove
in the thread guide.
* Make sure that the thread securely enters the thread
guide disks, otherwise the needle may not be
threaded.
a
Groove in thread guide
a
b
Memo
Look through the take-up lever check window to check
the position of the take-up lever. Before threading the
machine, make sure that the take-up lever is in the
raised position.
a
a
b
a
a
To Next Page
Loading...
Need help?
General
