How to troubleshoot a Brother LX3817 that does not work?
If your Brother Sewing Machine isn't working, make sure the main power switch is turned on. Also, check that the bobbin-winder shaft is moved to the left, and ensure you are using the foot controller correctly.
How to resolve skipped stitches on a Brother Sewing Machine?
If your Brother Sewing Machine is skipping stitches, make sure the upper thread is correctly threaded and you are using the right combination of fabric, thread, and needle. Replace the needle if it is bent or blunt, and ensure the needle is correctly installed. Clean any accumulated dust under the needle plate or in the bobbin case.
Why is my Brother LX3817 Sewing Machine fabric not feeding properly?
If the fabric does not feed through your Brother Sewing Machine, remove the darning plate from the needle plate. Ensure you are using the right combination of fabric, thread, and needle. Remove any tangled thread, cleaning the race if necessary. Attach the correct presser foot for the type of stitch you want to sew.
Why does the upper thread keep breaking on my Brother Sewing Machine?
If the upper thread keeps breaking on your Brother Sewing Machine, make sure you've threaded it correctly, removing any knots or tangles. Check that the needle is appropriate for the thread, and loosen the upper thread tension if it's too tight.
How to fix incorrect thread tension on a Brother Sewing Machine?
If the thread tension is incorrect on your Brother Sewing Machine, correct the upper threading and wind the bobbin thread properly. Choose a thread and needle appropriate for the fabric, and attach the presser foot holder correctly. Adjust the upper thread tension, use a bobbin designed for the machine, and reset the bobbin thread correctly.
Why is the fabric wrinkled when using my Brother Sewing Machine?
If the fabric is wrinkled when using your Brother Sewing Machine, thread the upper thread and wind the bobbin thread properly, and fit the spool correctly. Use the right combination of fabric, thread, and needle, and replace the needle if it's bent or blunt. For thin fabrics, sew with stabilizer material underneath. Ensure you're using the correct presser foot for the stitch and adjust the upper thread tension.
What causes the lower thread to tangle on a Brother LX3817 Sewing Machine?
If the lower thread is tangling or breaking in your Brother Sewing Machine, wind the bobbin thread properly and replace the bobbin if it's scratched or doesn't turn smoothly. Remove any tangled thread and clean the race. Use a bobbin designed for the machine and ensure the bobbin is set correctly.
What to do if the stitch is not sewn correctly on my Brother LX3817 Sewing Machine?
If the stitch is not sewn correctly on your Brother Sewing Machine, attach the correct presser foot for the type of stitch. Adjust the tension of the upper thread. Remove any tangled thread, and if the thread is tangled in the bobbin case, clean the bobbin case.
What to do if fabric is stuck in my Brother Sewing Machine?
If the fabric being sewn with your Brother Sewing Machine cannot be removed, lift up the fabric and cut the threads below it, then clean the race, as the thread is likely tangled below the needle plate.
Precautions to prevent electric shock and hazards, including proper unplugging and connection guidelines.
Guidelines for safe machine handling, work area, and sewing practices to prevent injury.
Instructions on connecting the machine, power, and foot controller for basic operation.
Step-by-step guide for winding thread onto the bobbin correctly.
Instructions for installing and threading the bobbin and lower thread.
Solutions for common machine problems such as not working, thread breaks, or fabric issues.
General| Type | Mechanical |
|---|---|
| Stitch Options | 17 |
| Maximum Stitch Width | 5 mm |
| Maximum Stitch Length | 4 mm |
| Buttonhole Style | 4-Step |
| Needle Threading System | Manual |
| Weight | 12.6 lbs |
| Included Accessories | Needles, bobbins, screwdriver |
To Next Page
