Brother LZ2-B856E User Manual (English)

Other manuals for Brother LZ2-B856E

Questions and Answers:

S
Stephanie SantiagoJul 31, 2025
Why are skipped stitches occurring while sewing with my Brother Sewing Machine?
- D
  Douglas LopezJul 31, 2025
  Skipped stitches can occur for several reasons: * The needle tip might be bent or blunt; if so, replace the needle. * The needle may not be installed correctly; ensure it is properly installed. * The machine might not be threaded correctly; re-thread the machine. * The presser foot pressure could be too weak; adjust the presser foot pressure. * The needle might be too thin; replace it with a slightly thicker needle. * The presser foot might be too high; adjust its height. * The needle and rotary hook timing might be off; adjust the height of the needle bar. * The clearance between the needle and the rotary hook may need adjustment. * The thread tension spring could be too weak; adjust its tension.
G
gregory57Aug 7, 2025
What to do if the upper thread is not tight on my Brother LZ2-B856E?
- A
  Amanda WatkinsAug 7, 2025
  If the upper thread is not tight, adjust the upper thread tension or lower thread tension.
J
jacksonamandaAug 14, 2025
What to do if the lower thread is not tight on my Brother LZ2-B856E Sewing Machine?
- F
  Frederick RichardsonAug 14, 2025
  If the lower thread is not tight, adjust the lower thread tension or upper thread tension.
J
julie11Aug 22, 2025
Why are flattened zigzags appearing during intermittent sewing on my Brother Sewing Machine (B855E)?
- L
  Lisa SummersAug 22, 2025
  Flattened zigzags during intermittent sewing can occur if the treadle has been depressed backward. Avoid pressing the treadle backward when the sewing machine is stopped. Additionally, if the treadle moves too easily when depressed backward, adjust the force required to make it a bit heavier.