Click on the ‘Menu’ tab on the machine’s control panel and press OK.
Select ‘Network’ and press OK.
Select the ‘LAN’ option and again press OK.
Find the ‘WLAN’ and click on ‘OK’ to confirm and wait for ‘WLAN enable’ to flash
on your screen. After this step, wait for a moment as it will then start the wireless
network wizard.
The device will now look for the network and display lists of available SSID’s,
select the one SSID with which you wish to connect and press ‘OK’.
Enter the network key and press ‘ok’ and then select yes in order to apply your
settings.
The device will now attempt to connect to the wireless device that you had
selected. If your wireless device is successfully connected, the machine’s ‘LCD’
screen will display the status as ‘connected’.
Download the printer driver software and your machine is ready to print.
How to Print Wlan Report in Brother printer
1. Press Menu on the touch screen.
2. Press the Up or Down arrow to display Print Reports.
3. Press Print Reports.
4. Press the Up or Down arrow to display WLAN Report.
5. Press WLAN Report.
6. Press Black (Mono) Start, Color (Colour) Start or Start.
To Previous Page
Loading...
