Brother MFC-L2712DN - Page 87

Fig. 3-93
(5)
Remov
e the Gear1
15L 30L drum, the Ge
ar 50L PF
, the Clutch PF
, and the Gear 23R PF
from the Frame L unit.
(6)
Remov
e the Gear 68R d
rum idle f
rom the Mot
or plate ASSY
, and remov
e the Motor pl
ate
ASSY from the Frame L unit.
(7)
Remov
e the three Sc
rew bind M3
x4 screws
, and remov
e the Paper f
eed motor fr
om the
Motor plate
ASSY
.
(8)
Disco
nnect th
e Paper fe
ed motor
flat cab
le from t
he Pape
r feed mot
or
.
Assembling Note:
•
If you remove
d the Motor drive s
ub ASSY while the Fus
er unit was att
ached on the
machine, remove the Fuser unit once (refer to
“9.18 Fuser unit”
) and reattach it after
attaching the Motor
drive sub ASSY.
The Conductive leaf spring of the Fuser unit may be deformed by the Calking shaft.
If they are not in
contact properly, a ghost may occur in the printed
image.
Fuser unit
Conductive leaf
spring
Calking shaft
Frame L unit
Screw bind M3x4
Gear 68R drum idle
Gear115L 30L drum
Gear 23R PF
Paper feed motor flat cable
Paper feed motor
Gear 50L PF
Clutch PF
Motor plate ASSY