Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Change
for Daylight Saving Time Automatically
Change for Daylight Saving Time Automatically
You can program the machine to change automatically for Daylight Saving Time.
It will reset itself forward one hour in the spring, and backward one hour in the fall. Make sure you have set the
correct date and time in the Date & Time setting.
1. Press
[Settings] > [All Settings] > [Initial Setup] > [Date & Time] > [Auto
Daylight].
2. Press [On] or [Off].
3. Press
.
Related Information
• General Settings
605
To Next Page
Loading...
