Why do needles break on my Brother Sewing Machine?
If your Brother Sewing Machine needles are breaking, it could be due to several reasons. First, check if the needle is bent or blunt, and replace it if needed. Ensure that the needle is installed correctly. Avoid pulling the material forcibly while sewing.
What to do if my Brother PS3734T Sewing Machine does not feed?
If your Brother Sewing Machine is not feeding material, the presser foot pressure might be too loose. Turn the pressure adjustment screw clockwise to increase the presser foot pressure.
Why are my Brother Sewing Machine threads breaking?
Thread breakage in your Brother Sewing Machine can occur due to several reasons: * Incorrect threading: Ensure you've threaded the machine correctly. * Tangled thread: Check the spool pin and thread holders for any tangles and remove them. * Excessive thread tension: Adjust the thread tension. * Incorrectly installed needle: Make sure the needle is installed correctly. * Wrong needle type: Use the recommended needle type 130/705H.
Why is my Brother Sewing Machine skipping stitches?
Skipped stitches on your Brother Sewing Machine can happen for a few reasons: * A bent or blunt needle: Replace it with a new one. * Incorrect needle installation: Ensure the needle is correctly installed. * Using the wrong needle: Use the correct needle type 130/705H. * Improper threading: Thread the machine correctly. * Insufficient presser foot pressure: Increase the pressure by turning the pressure adjustment screw clockwise.
What to do if fabric is puckered when using my Brother Sewing Machine?
Fabric puckering when using your Brother Sewing Machine can be due to: * Excessive thread tension: Decrease the thread tension, especially when sewing lightweight or fine materials. * Improper threading or tangled thread: Ensure correct threading.
How to fix uneven stitches on my Brother PS3734T?
If the stitches on your Brother Sewing Machine are not uniform, it may be caused by thread tensions that are not adjusted properly. Adjust the thread tension to resolve this issue.
Why does my Brother Sewing Machine not feed fabric?
If your Brother Sewing Machine is not feeding fabric, the presser foot pressure may be too loose. Turn the pressure adjustment screw clockwise to increase the presser foot pressure.
General| Number of Stitches | 37 |
|---|---|
| Needle Threading System | Automatic |
| Buttonhole Styles | 1-step |
| Maximum Stitch Width | 5 mm |
| Maximum Stitch Length | 4 mm |
| Built-in Free Arm | Yes |
| Type | Electronic |
| Weight | 6.3 kg |
| Dimensions | 410 x 170 x 308 mm |
To Next Page
