EasyManuals Logo

Brother XR-40 User Manual

Brother XR-40
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
www.brother.com
Brother
General
Sewing
Accessories
10
Overlock Foot
Picot Foot
SA135
GHILOP
Brother
General
Sewing
Accessories
09
Narrow Hemmer Foot
Non Stick Foot
Narrow Hemmer Foot
Designed to create a flat narrow hem on lightweight fabrics.
1. Place the fabric with the wrong side facing up under the presser foot.
2. Lower the needle into the fabric approximately 1/8" from the edge and sew 2-3 stitches.
3. Raise the needle and the presser foot.
4. Hold the fabric from the back and front and roll it into the curled part of the foot.
5. Position the edge of the fabric behind the needle and lower the presser foot.
6. Slowly sew 2-3 stitches, making sure the fabric is rolling around the curled part of the foot.
7. Continue to sew to the end of the fabric.
SA127
GHILOP
SA126
ABCDEFJKMN
SA114
ABCDEFGHJKLMNO
SA122
IP
Non Stick Foot
Designed for consistent feeding with fabrics such as leather, vinyl and
other novelty fabrics.
Select a desired stitch and sew.
Overlock Foot
For vertical bobbin machines only.
Sews overcast seams to protect edges from fraying.
1. Select an overlock stitch.
2. Attach the presser foot.
3. Lower the presser foot so that the foot guide is exactly against the edge of the fabric.
4. Sew along the guide.
Picot Foot
Creates shell-looking edges on sheer and very lightweight fabrics.
1. Increase upper thread tension.
2. Place the fabric with the wrong side facing up under the presser foot.
3. Lower the needle into the fabric approximately 1/8" from the edge and sew 2-3 stitches.
4. Raise the needle and the presser foot.
5. Hold the fabric from the back and front and roll it into the curled part of the foot.
6. Position the edge of the fabric behind the needle and lower the presser foot.
7. Slowly sew 2-3 stitches, making sure the fabric is rolling around the curled part of the foot.
8. Continue to sew to the end of the fabric.
SA164
ABCDEFJKMN
SA149
GHILOP
Innov-is Project Book
(See page 50 for details.)
Skirt
Innov-is Project Book
(See page 53 for details.)
Travel Jewelry Portfolio

Other manuals for Brother XR-40

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother XR-40 and is the answer not in the manual?

Brother XR-40 Specifications

General IconGeneral
BrandBrother
ModelXR-40
CategorySewing Machine
LanguageEnglish

Related product manuals