Need help?Do you have a question about the Brother Z-8550A and is the answer not in the manual?
General| Sewing Speed | 5, 000 stitches per minute |
|---|---|
| Needle System | DP x 5 |
| Power Requirements | 220-240V, 50/60Hz |
| Type | Industrial |
| Stitch Type | Zigzag |
| Stitch Length | 0-5mm |
General safety notes and precautions for machine operation and handling.
Specifies optimal temperature, humidity, and electrical environment for machine use.
Guidelines and procedures for safely installing the sewing machine.
Safety precautions specific to sewing, cleaning, and maintenance procedures.
Procedures for maintenance, inspection, and understanding warning labels on the machine.
Identification and overview of the main components of the sewing machine.
Technical details and performance specifications of the sewing machine models.
A reference table listing available built-in sewing patterns and their numbers.
Technical diagrams and dimensions for preparing the sewing machine table.
Detailed steps for installing main components like control box and power switch.
Instructions for lubricating the sewing machine for optimal performance.
Procedures for correctly connecting the electrical cords to the machine.
Steps to perform a test operation after installation to ensure functionality.
Procedures for installing the needle and handling the bobbin case.
Steps for winding the lower thread and threading the upper thread.
Adjusting stitch length, backtacking, knee lifter, and thread wiper operations.
Overview of the operation panel keys, displays, and their functions.
Detailed guide on selecting and setting sewing patterns.
How to adjust the zigzag stitch width for different patterns.
Instructions for adjusting the zigzag pattern's horizontal position.
How to set the needle stop position for zigzag stitches.
Procedure for setting start backtack stitches.
Procedure for setting end backtack stitches.
How to set up continuous backtacking for sewing.
Guide for setting fixed stitches and name label sewing patterns.
Details on advanced operation panel keys and displays.
How to adjust the needle's default stop position.
Explanation of the LOCK key function and its effect on operation.
Procedure to reset all panel settings to factory defaults.
Guide on how to record, retrieve, and use custom sewing programs.
How to set and adjust the machine's maximum sewing speed.
Detailed instructions for adjusting upper and lower thread tension for optimal stitches.
How to adjust the presser foot pressure for different materials.
Routine cleaning steps to maintain machine performance and longevity.
Procedures for checking gearbox oil quantity and oil tank levels.
Instructions for applying grease when prompted by the machine.
Procedure for replacing the fixed and movable knives (8560A only).
Instructions for replacing gauge parts like the presser foot, needle plate, and feed dog.
How to adjust the position of the actuator for optimal operation.
Procedure to adjust the safety switch position for proper function.
How to adjust the thread tension spring position and tension.
How to set the timing between the needle and the rotary hook.
How to check and adjust the lubrication amount for the rotary hook.
Adjusting the treadle's sensitivity and stroke for better control.
How to adjust the thread trimming cam position (8560A only).
Instructions for installing optional presser bar U and tips.
Troubleshooting common sewing problems like thread tension and skipped stitches.
Guide to understanding and resolving error codes displayed by the machine.
To Next Page
