3 - 1
PRE-START INSTRUCTIONS section 3
SPECIFICATIONS FOR FUELS AND OILS
EN GINE OIL
Fill the crankcase with oil that meets API service
designation SF, SF/CC, or SF/CD. Do not mix brands
or grades of oil. Recommended weight for general all
temperature use is:
SAE 10W- 30
FUEL
Use clean, fresh, regular or unleaded fuel. Use of
unleaded fuel results in less maintenance.
GEAR BOX OIL
Fill the gearbox with gear oil. Recommended
weight for general all temperature use is SAE 90
EP
NEVER USE ETHER AS A STARTING AID, OR
SEVERE DAMAGE TO ENGINE MAY OCCUR.
NEVER FILL FUEL TANK WITH ENGINE
RUNNING!
To Next Page
Loading...
