5 - 2
SERVICE section 5
LUBRICATION
For engine service/maintenance procedure, refer to the engine manufacturer owner's manual.
• Following the recommended lubrication/maintenance program will help maintain a trouble free service life for
this machine. All of the bearings on the Sod Cutter are of the sealed type and under normal circumstances do
not require lubrication.
• The following lubrication instructions, with reference to Drawing 18, are recommended:
1. Grease gun to the blade arms Weekly
2. Light oil to: Throt tle ca ble & link age Monthly
3. Wheel hubs Monthly
4. Jack stand Monthly
5. Con trol han dles Monthly
6. Light oil to Cen trifu gal clutch Six months
7. Check SAE 90 oil level in Gear box Six months
To Next Page
Loading...
