EasyManua.ls Logo

Brouwer MARK 2 - Storage and Transport Instructions

Default Icon
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 - 7
SERVICE section 5
Daily Storage
Check engine oil level and air filter element in
accordance with engine manufacturer owner's
manual.
Close off fuel flow valve.
Clean cutting blades of grass, dirt, etc.
Extended Storage
Before storing the unit for a period exceeding 30
days, the following precautions should be taken:
Drain all fuel from the fuel tank and lines. Using a
hose or fuel line attached to the fuel shut off
valve, drain fuel into a suitable container.
Start the engine and run until all fuel remaining in
the float bowl is used up.
Prepare the engine in accordance with the
engine manufacturer's recommendation in the
owner's manual.
Clean the unit of any dirt, grass, etc. and
lubricate according to lubrications instructions.
Clean and oil cutting blades to prevent rust.
Returning To Service
Fill fuel tank.
Check engine crankcase oil level, refer to engine
manufacturer owner's manual.
Check for fuel leaks.
Start engine and check for fuel or oil leaks.
Transporting Unit
When transporting unit by truck or trailer, place
the control handles (1) in stowed position. Shut
off fuel flow valve (2). Place unit on kickstand (3)
and block the wheels (4) to prevent movement.
See Drawing 19.
STORAGE INSTRUCTIONS
Drawing 19

Related product manuals