To Next PageTo Next Page
Need help?Do you have a question about the Browan WAPS-232N LW and is the answer not in the manual?
Key instructions for installation, product labeling, and device modification.
Lists directives for Radio Equipment, Low Voltage, EMC, and RoHS compliance.
Lists harmonized standards used for conformity declarations.
Lists UK regulations for EMC, Radio Equipment, and Electrical Equipment safety.
This document provides a comprehensive guide for the BROWAN WAPS-232N_LW Outdoor Micro Gateway, detailing its function, usage, and maintenance aspects.
The BROWAN WAPS-232N_LW is an outdoor micro gateway designed to facilitate LoRaWAN communication. Its primary function is to act as a bridge between LoRaWAN end devices and a network server, enabling long-range, low-power data transmission for various IoT applications. This gateway is built for outdoor deployment, suggesting a robust design capable of withstanding environmental challenges.
The core function of the WAPS-232N_LW gateway is to receive data packets from LoRaWAN end devices within its coverage area and forward them to a LoRaWAN network server. Conversely, it also transmits downlink messages from the network server to the end devices. This two-way communication capability is fundamental to the operation of any LoRaWAN network, allowing for data collection, command execution, and device management.
The gateway supports multiple antenna ports, including dedicated connections for GPS, 3G/4G (optional, for LTE SKUs), and LoRa antennas. The GPS antenna allows the gateway to obtain precise location information, which can be crucial for network planning, asset tracking, and time synchronization. The 3G/4G antenna provides cellular backhaul connectivity, enabling the gateway to send and receive data from the network server even in locations without wired internet access. This makes the WAPS-232N_LW highly versatile for deployments in remote or challenging environments. The LoRa antenna is essential for its primary function, facilitating the long-range communication with LoRaWAN end devices. The document specifically notes that LoRa antennas are excluded from the package contents, implying that users need to source them separately based on their specific deployment needs and desired coverage.
The gateway is designed to be powered over Ethernet (PoE), simplifying installation by allowing both power and data to be transmitted over a single Ethernet cable. This reduces cabling complexity and costs, especially in outdoor settings where power outlets might be scarce. The package includes a PoE adapter and a power cord, indicating a complete solution for power delivery.
The WAPS-232N_LW also features a 3G/4G Mini SIM card slot, reinforcing its cellular backhaul capability. This allows users to insert a SIM card from a cellular provider to establish internet connectivity for the gateway. This feature is particularly beneficial for deployments in areas where traditional wired internet infrastructure is unavailable or impractical.
The WAPS-232N_LW is designed for straightforward installation and operation. The package contents include a mount kit, suggesting that the gateway can be easily mounted in various outdoor locations, such as poles or walls. The inclusion of a waterproof RJ45 casing highlights its suitability for outdoor use, protecting the Ethernet connection from environmental elements like rain and dust.
The quick start guide emphasizes the importance of reading the "Installation Guide" before commencing installation, indicating that while the process is designed to be user-friendly, specific steps and precautions should be followed to ensure proper setup and optimal performance. This also suggests that the installation guide provides more detailed instructions, possibly including mounting procedures, antenna connections, and initial configuration steps.
The gateway's support for 16CH SKUs (Stock Keeping Units) implies that it can handle a higher number of LoRa channels, which is beneficial for networks with a large number of end devices or those requiring higher data throughput. The ANT4 port is specifically provided for 16CH SKUs, indicating a scalable design that can adapt to different network requirements.
The document highlights the importance of connecting antennas to the correct ports, stating, "All antenna ports are N-type female. Do not connect the antenna to the wrong port." This is a crucial usage instruction to prevent damage to the gateway and ensure proper functionality. Incorrect antenna connections can lead to poor signal quality, reduced range, or even permanent damage to the radio modules.
The inclusion of an RF cable (3000 mm) in the package suggests that users are provided with a standard length of cable for connecting an external antenna, offering flexibility in antenna placement relative to the gateway.
While the document does not explicitly detail a separate "Maintenance Features" section, several aspects imply ease of maintenance and best practices for long-term operation.
The instruction "Do not remove the product label" is a standard maintenance guideline, as product labels often contain important information such as serial numbers, model numbers, and regulatory certifications, which are essential for warranty claims, troubleshooting, and identification.
The directive "The device must not be dismantled or modified in any way" is a critical maintenance and safety instruction. Unauthorized dismantling or modification can void warranties, compromise the device's integrity, and potentially lead to safety hazards or regulatory non-compliance. This suggests that any internal servicing or repairs should only be performed by authorized personnel.
The gateway's robust outdoor design, including the waterproof RJ45 casing, inherently contributes to reduced maintenance by protecting internal components from environmental damage. This minimizes the need for frequent inspections or repairs related to weather exposure.
The availability of a user guide and installation guide, accessible via QR codes and an online document, serves as a valuable resource for troubleshooting and maintenance. These guides likely contain information on common issues, diagnostic procedures, and recommended practices for ensuring the gateway's optimal performance over time.
The regulatory compliance information (CE, FCC, RoHS, UKCA) indicates that the device meets international standards for safety, electromagnetic compatibility, and hazardous substance restrictions. This compliance not only ensures the device's legal operation in various regions but also implies a certain level of quality and reliability, which contributes to lower maintenance requirements.
The contact information provided (website and email) offers a direct channel for users to seek support, report issues, or inquire about maintenance procedures, ensuring that assistance is readily available when needed.
In summary, the BROWAN WAPS-232N_LW Outdoor Micro Gateway is a versatile and robust LoRaWAN gateway designed for outdoor deployments. Its key functions include long-range data transmission, cellular backhaul, and GPS capabilities. Usage is simplified by PoE, easy mounting, and clear antenna connection guidelines. Maintenance is supported by its durable design, regulatory compliance, and readily available documentation and support channels, all contributing to a reliable and efficient IoT solution.
General| Model | WAPS-232N LW |
|---|---|
| Category | Gateway |
| Manufacturer | Browan |
| Certifications | CE, FCC |
| Connectivity | LoRaWAN, Ethernet |
| Frequency Bands | EU868, US915, AU915, AS923, KR920, IN865 |
| Ethernet | 10/100M Ethernet |
| Wi-Fi | 802.11b/g/n |
| Power Supply | 12V DC |
| Humidity | 5% to 90% non-condensing |
