13
maintain any ownership information on gun safes, and combinations are
tracked only by serial number. If you lose your combination, we will only
release it upon completion of a security check process that requires your
safe’s serial number and several other steps. Your safe’s serial number is
located on the upper right-hand corner of the rear of the safe. There is a
place to record this serial number on the first page of this owner’s manual.
LOCK MAINTENANCE
Your combination lock should not require any maintenance. Do not spray
or apply any lubrication to any lock parts. If your dial is difficult to turn,
there is a problem with the lock mechanism. Lubrication will not solve the
problem. Contact Browning/ProSteel for assistance.
Should your keylock stick or be difficult to turn, you can put a small drop
of light oil on the key before inserting it into the keyway.
CHANGING THE COMBINATION:
S & G MECHANICAL LOCK
Your combination is pre-set at the factory. Changing the combination will
void your lock warranty. If you must change the combination for some
reason, contact a certified locksmith to do this for you.
KEYLOCK
The keylock in your combination dial is used to lock the dial only. This is a
convenience feature that allows you to lock your dial so that it will not
accidentally rotate and lock while you are moving items into or out of your
safe. The keylock also allows you to lock the dial while the safe is in the locked
position. This prevents the dial from being turned while the safe is locked.
To lock your dial with the key, turn the dial until the “0” is resting in the
12 o’clock position, where the black line is located on the top of your dial
ring and turn the key clockwise in the key lock.
Should you lose your keys, a replacement key may be ordered with the
serial number printed on the upper right-hand corner of your
combination tag. The number should be phoned to us. We will provide
additional keys and send them to you for a reasonable fee. (Approximately
$8 per key as of this manual printing.)
05-142-BSF_Safe OM 10/12/05 4:13 PM Page 13
To Next Page
Loading...