What to do if Broyhill 1926FM-23-413 has no power?
If your Broyhill Indoor Fireplace isn't powering on, ensure the power cord is securely plugged into a functioning 120V outlet and that the unit is switched on.
Why does my Broyhill 1926FM-23-413 Indoor Fireplace power cord get warm?
It's normal for the power cord of your Broyhill Indoor Fireplace to get warm during operation because the heater requires more current. However, regularly inspect the cord and outlet for overheating. Ensure the plug fits tightly. If the plug or outlet gets hot, stop using the fireplace and consult a qualified technician to inspect or replace the outlet.
What to do if the remote control of Broyhill 1926FM-23-413 doesn't work?
If the remote control for your Broyhill Indoor Fireplace isn't working, replace the battery with a new CR-2025 battery.
What to do if Broyhill 1926FM-23-413 Indoor Fireplace displays error E1?
If your Broyhill Indoor Fireplace displays error code E1, it means the overheat sensor has been engaged. Unplug the unit and wait 15-20 minutes for the sensor to reset. Then, plug it back in and turn on the heater. If the error persists, contact customer service. Note that other functions besides the heater should still work.
What to do if Broyhill Indoor Fireplace displays error E2?
If your Broyhill Indoor Fireplace displays error code E2, it indicates that the thermostat sensor is broken or malfunctioning. Unplug the unit and wait 15-20 minutes for the sensor to reset. Plug it back in and turn on the heater. If the problem continues, contact customer service. Note that other functions besides the heater should remain operational.
Why does the fan motor of Broyhill Indoor Fireplace continues to blow after being powered off?
It is normal. The blower runs for an additional time to cool off the heater tubes.
How to fix weak remote control signal of Broyhill 1926FM-23-413?
If your Broyhill Indoor Fireplace remote control signal is weak, press the buttons slowly and steadily. Also, ensure you are within 20 feet of the fireplace insert and within a 45-degree angle from the front.
What to do if Broyhill Indoor Fireplace has no flame effect?
If your Broyhill Indoor Fireplace is powered on but has no flame effect, first, push the flame brightness button until you achieve the desired level. Also, make sure the USB cable is connected into the USB port behind the Fireplace Grate.
Guidance on assembly preparation, safety precautions, and essential instructions.
Instructions for safe electrical connection and grounding.
Detailed instructions for physically assembling the fireplace unit.
Lists of all components and hardware required for assembly.
How to use the control panel, remote, and heater functions.
Guidance on cleaning, common issues, and ordering replacement parts.
Details of the one-year limited warranty for the fireplace.
General| Brand | Broyhill |
|---|---|
| Model | 1926FM-23-413 |
| Category | Indoor Fireplace |
| Language | English |
To Next Page
