Broyhill 810493160 - User Manual

Need help?

Do you have a question about the Broyhill 810493160 and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features

This document provides assembly instructions and care information for the Broyhill Eastlake Coffee Table.

Function Description:

The Broyhill Eastlake Coffee Table is a piece of furniture designed for use in living spaces. Its primary function is to provide a surface for placing items such as drinks, books, or decorative objects, and to complement the aesthetic of a room. The table features a rectangular tabletop and two ornate, scroll-design table legs that serve as its base.

Important Technical Specifications:

Item Number: GBO21-305-3
SKU Number: 810493160
Components:
- Table Top (Part 1): 1 unit
- Table Leg (Part 2): 2 units
- Support (Part 3): 1 unit
- Screw (φ6x15mm) (Part 4): 4 units
- Screw (φ6x25mm) (Part 5): 8 units
- Washer (Part 6): 12 units
Tools: The assembly requires a wrench, which is included in the package.

Usage Features:

Assembly Process: The assembly is divided into three steps.
- Step 1: Involves attaching the two table legs (Part 2) to the tabletop (Part 1) using eight φ6x25mm screws (Part 5) and eight washers (Part 6). It is crucial to keep these screws loose during this initial stage.
- Step 2: Requires attaching the support bar (Part 3) between the two table legs (Part 2) using four φ6x15mm screws (Part 4) and four washers (Part 6). Again, screws should be kept loose.
- Step 3: After all parts are assembled loosely, all screws should be tightened to secure the structure.
Safety Precautions during Assembly:
- Read all instructions before starting.
- Clear a flat, covered space for assembly.
- It is recommended to assemble with a friend.
- Ensure all required hardware is present for each step.
- Pay attention to the orientation of parts.
- Match part letters to stickers on the products and hardware numbers to the package.
- Use the correct screws as indicated and hand-tighten until the piece is assembled to facilitate the process. Once fully assembled, use the provided tool to tighten all screws.
- Keep children and pets away from the assembly area and supervise them if they are nearby.
- Maintain an assembly area at least 6 feet from obstructions like fences, garages, houses, overhanging branches, laundry lines, or electrical wires.
- Be aware that some parts may have sharp edges; follow basic safety precautions to reduce the risk of injury.
- The table is not intended for standing on or as a stool/step-ladder. Use only on even surfaces.
- To ensure the product stands evenly, install all screws loosely first, adjust the product to stand on the floor, and then tighten all screws.
Warranty: The product comes with a one-year limited warranty. A dated register receipt (proof of purchase) is required for warranty claims. The customer is responsible for freight and packing charges to and from the service center for warranty service.

Maintenance Features:

Cleaning: Before initial use, clean the product completely with a soft dry towel. For regular cleaning, wipe off any dirt or loose objects, then wash with a mild solution of soap and water. Rinse thoroughly and dry completely.
Prohibited Cleaners: Do not use strong detergents or abrasive cleaners, as these can damage the product.
Screw Tightness: Over time, screws can loosen. Periodically check the screws on the table and re-tighten them if necessary to maintain stability and safety.