BRP Can-Am Commander 1000 XT 2014 User Manual

SIDE-BY-SIDE
VEHICLES
PREDELIVERY
Bulletin
July 4
th
, 2013 Subject:Predelivery Inspection Can-Am™
Commander™ Series
No. 2014-2
COMMANDER
YEAR
ENGINE MODEL MODEL N UMBER
SERIAL
NUMBER
STD 6CEA, 6CEB, 6CEC
DPS
6TEA, 6TEB
800R
XT
6DEA, 6DEB, 6
DEC
STD
6AEA, 6AEB
DPS
6PEA
XT
6BEA, 6BEB, 6
BED, 6BEE, 6BEF, 6BEG, 6BEH
XT-P
6EEA, 6EEB, 6EEC
2014
1000
LTD
6GEA, 6GEB, 6GED
All
Printed in Canada. (tbl2014-003 en JT)
©2013 Bombardier Recreational Products Inc. and BRP US Inc. All rights reserved.
1/54
®™ and the BRP logo are trademarks of Bombardier Recreational Products Inc. or its affiliates.

BRP Can-Am Commander 1000 XT 2014 Specifications

General

Brand	BRP
Model	Can-Am Commander 1000 XT 2014
Category	Offroad Vehicle
Language	English

Summary

IMPORTANT NOTICE

Warranty and Torque Specifications

Predelivery procedures must be performed by authorized dealers. Apply all necessary torques as indicated.

PARTS TO BE INSTALLED

Battery Installation Procedure

Shock Absorber Installation

Cage Installation Procedure

FLUIDS

Fueling Recommendations

Engine Oil Check and Recommendations

Procedure for checking engine oil level and recommended oil types.

Engine Coolant Level Verification

B.U.D.S. PROGRAMMING

Diagnostic Connector Location

Locating the diagnostic connector for B.U.D.S. software on the vehicle.

Connecting PC to Vehicle for B.U.D.S.

Steps to connect a PC to the vehicle for B.U.D.S. software.

Establishing B.U.D.S. Software Communication

Guide to establishing communication between B.U.D.S. software and the vehicle.

ADJUSTMENTS

Suspension Adjustments Guideline

Spring Preload Adjustment (Front and Rear)

Detailed procedure for adjusting spring preload on front and rear suspension.

Shock Damping Adjustments (Front and Rear)

Instructions for adjusting low speed, high speed compression and rebound damping.

FINAL INSPECTION

Delivery To Customer Procedures