BRP Commander 800R Can-Am 2013 User Manual

INTRODUCTION
INTRODUCTION
This Shop Manual covers the following BRP made
2013 Can-Am side by side vehicles.
MODEL
ENGINE
TYPE
MODEL NUMBER
Commander
800R
810
6CDA, 6CDB, 6CDC, 6TDA,
6DDA, 6DDB, 6
DDC
Commander
1000
1010
6ADA, 6ADB, 6PDA, 6BDA,
6BDB, 6BDD,
6BDE, 6BDF,
6BDG, 6BDH, 6EDA,
6EDB, 6EDC, 6EDD, 6GDA,
6GDB, 6GDC,
6GDD
The information and component/system descrip-
tions contained in this manual are correct at time
of writing. BRP however, maintains a policy of
continuous improvement of its products without
imposing upon itself any obligation to install them
on products previously manufactured.
Duetolat
e changes, there may be some differ-
ences bet
ween the manufactured product and the
descript
ion and/or specifications in this document.
BRP reserves the right at any time to discontinue
or change specifications, designs, features, mod-
els or equipment without incurring obligation.
VEHICLE INFORMATION
VEHICLE IDENTIFICATION
NUMBER (VIN)
tmr20
11-002-001_a
TYPICAL
1. VIN (Vehicle Identification Number) location
The VI
N (Vehicle Identification Number) decal is lo-
cate
d under the glove box on the passenger side.
VIN Decal Description
tmr2011-002-005_a
TYPICAL — VEHICLE IDENTIFICATION NUMBER LABEL
1. VIN (Vehic
le Identification Number)
2. Model number
3. Manufacturing date
ENGINE IDENTIFICATION
NUMBER (EIN)
tmr201
1-002-002_a
TYPICAL - RH SIDE OF ENGINE
1. Engine Identification Number (EIN)
LIFTING AND SUPPORTING THE
VEHICLE
Front
of Vehicle
1. Place vehicle on a flat non slippery ground.
2. Ensure vehicle shift lever is set to PARK.
3. Inst
all an hydraulic jack under front skid plate.
4. Lift front of vehicle and install a jack stand on
each side under frame section in front of the lip
for center skid plate.
X tmr2013-002
www.MilitaryAtv.com

BRP Commander 800R Can-Am 2013 Specifications

General

Brand	BRP
Model	Commander 800R Can-Am 2013
Category	Offroad Vehicle
Language	English

Summary

Introduction and Vehicle Identification

Model and Engine Type Overview

Lists BRP Can-Am side-by-side models and their engine types.

VIN Decal and Engine Identification

Description and location of Vehicle Identification Number (VIN) and Engine Identification Number (EIN) decals.

Lifting and Supporting the Vehicle - Front

Procedure for safely lifting the front of the vehicle using jack stands.

Vehicle Handling and Support

Lifting and Supporting the Vehicle - Rear

Procedure for safely lifting the rear of the vehicle using a jack and jack stands.

Hoisting the Vehicle Safely

Guidelines and warnings for hoisting the vehicle using a hoist and lifting strap.

Transporting the Vehicle

Vehicle Loading and Securing

Instructions for loading, tie-down straps, and securing the vehicle for transport.

Towing Warning and Precautions

Caution against towing the vehicle and advice for transport services.

Engine Emissions and Regulations

Emissions Responsibilities

Defines responsibilities of manufacturers, dealers, and owners regarding engine emissions.

EPA Emission Regulations and Compliance

Information on EPA certification, standards, and contact details for emissions information.

Manual Usage and Procedures

Understanding Manual Structure

Explanation of manual layout, sections, subsections, and typical page elements.

Procedure Guidelines and Warnings

Advice on following procedures, safety warnings, and tool requirements.

Typical Page Elements Explained

Details on interpreting exploded views, call-outs, and part identification in the manual.

Technical Procedures and Fasteners

Tightening Torque Specifications

Table of torque values for various fastener grades and sizes, with application notes.

Fastener Information and Usage

Notes on metric fasteners, self-locking fasteners, and Loctite application procedures.

Loctite Application Techniques

Detailed instructions for applying Loctite threadlocker on different types of fasteners and holes.

Specialized Repair and Assembly Techniques

Thread Repair and Gasket Application

Procedures for stripped thread repair, gasket compound application, and shaft mounting.

Bearing and Case Component Mounting

Instructions for mounting bearings and case-in components like metallic gaskets.

Service Tools Index

Index of Specialized Service Tools

Comprehensive index of tools with part numbers and corresponding page references.