BRP Evinrude E-TEC G2 - Important On-Product Labels

16
IIMMPPOORRTTAANNTT OONN--PPRROODDUUCCTT LLAABBEELLSS
This outboard comes with hang tags
and labels containing important safety
information about the operation of the
outboard. Any person who operates
this outboard should read and under-
stand this safety information.
LLaabbeellss
All outboards have the following labels
attached:
IImmppoorrttaanntt OOnn--PPrroodduucctt LLaabbeellss
The following symbols are used to-
gether to indicate “CAUTION: Read
the engine’s Operator’s Guide before
proceeding.
Operator's
Guide
11.. RREEAADD OOPPEERRAATTOORR’’SS GGUUIIDDEE LLAABBEELL
KEEP HANDS CLEAR!
Rotating parts
can crush and cut.
Do not operate
with guard removed.
0358046-00
22.. WWAARRNNIINNGG LLAABBEELL
P/N 0358210-00
This outboard has been
programmed for use of
Evinrude
®
XD50™ oil,
XD100™, or synthetic
TC-W3 NMMA-certified oil.
EVINRUDE XD100™ OIL
IS PREFERRED FOR YOUR
EVINRUDE
®
E-TEC
®
G2™
OUTBOARD.
Refer to the Operator's
Guide for Oil
Requirements.
NOTICE
33.. OOIILL UUSSAAGGEE NNOOTTIICCEE LLAABBEELL
FEL / LEF
EMISSION CONTROL INFORMATION - BRP US INC.
THIS ENGINE CONFORMS TO U.S. EPA & CALIFORNIA
EMISSIONS/EVAP REGULATIONS FOR MARINE SI ENGINES
RENSEIGNEMENTS SUR LE DISPOSITIF ANTIPOLLUTION
CE MOTEUR EST CONFORME AUX NORMES DE L'EPA DES É. - U. &
CALIFORNIENNES POUR LES MOTEURS MARINS À ALLUMAGE COMMANDÉ
ENGINE FAMILY / FAMILLE DE MOTEUR
ENGINE DISPLACEMENT / CYLINDRÉE
EMISSION CONTROL SYSTEM
SYSTÈME DE CONTRÔLE DES ÉMISSIONS
SEE OPERATOR'S GUIDE FOR MAINTENANCE SCHEDULE
AND FUEL, OIL AND SPARK PLUG SPECIFICATIONS.
VOIR LE CALENDRIER D'ENTRETIEN ET LES
SPÉCIFICATIONS D'ESSENCE, D'HUILE ET DE BOUGIE
D'ALLUMAGE DANS LE GUIDE DE L'OPÉRATEUR.
121
MOD:
SER:
kW
kg
OUTBOARD ENGINE
MOTEUR HORS-BORD
BRP US Inc.
10101 SCIENCE DRIVE
STURTEVANT, WI, U.S., 53177
BRP EUROPE N.V.
SKALDENSTRAAT 125
GENT, BELGIUM, 9042
XXXXXXXXX XXXX
XXXXXXX XXX XX
1
2
1. Emissions Control Label
2. Serial / Model Number Label