52
PRODUCT INFORMATION
250, 300 (3.4 Liter) Models
Displacement 3441 cc (210 cu. in.)
Engine Type 90° V, 6 Cylinder, Two-Cycle, E-TEC
Full Throttle Operating Range 250 HP – 4500 to 6000 RPM
300 HP – 5000 to 6000 RPM
Power
(1)
(1) Rated following the standards of ICOMIA 28.83, ISO 3046 and NMMA.
250 HP – 184 kw (250 HP) @ 5250 RPM
300 HP – 221 kw (300 HP) @ 5500 RPM
Idle RPM in Neutral
(2)
(2) Emission Control Information.
500 ± 50
Ignition Timing
(2)
Controlled by the outboard’s EMM
Emission Control System:
per SAE J1930
(2)
ECM, E-TEC (Engine Control Module, E-TEC)
Fuel Requirements
(2)
87 Pump Posted AKI (90 RON) – Refer to FUEL REQUIREMENTS on page 17
Oil – Lubricant Evinrude/Johnson XD100 oil or TC-W3 NMMA-certified oil
– Refer to OIL REQUIREMENTS on page 16
Warning Signals Controlled by the outboard’s EMM
Battery, Minimum
(3)(4)
(3) Use a 1000 MCA (800 CCA) battery when operating in temperatures below 0°C (32°F).
(4) Under extraordinary electrical load or environmental conditions, use a 107 amp-hour minimum battery (generally
available in group 29 size).
845 MCA (675 CCA) 12 volt or
1000 MCA (800 CCA) 12 volt below 0°C (32°F)
Spark Plug
(2)
Refer to ECI Label
To Next Page
Loading...
