279
TTYYPPIICCAALL
NNOOTTEE::
The storage mode does not function in other modes (trip A, trip B and
hr trip).
4. Repeatedly depress the HI/LOW beam switch rapidly, then, wwhhiillee
ddooiinngg tthhiiss, press and hold the SSEETT bbuuttttoonn until PUSH "S" ap-
pears on the display.
TTYYPPIICCAALL
5. Release all buttons when gauge displays PPUUSSHH ((SS)) appears.
6. Again, press and hold the SET (S) button for 2 - 3 seconds.
NNOOTTEE::
The gauge will display OIL when the storage procedure is initiated.
7. When gauge displays OOIILL, release button and wait for the lubrica-
tion function to end.
STORAGE
To Next Page