BRP ROTAX 916 i A Series Maintenance Manual

BRP-Rotax
MAINTENANCE MANUAL LINE
Figure 7.13: Special tool
1
Oil filter wrench part no. 877620*
2
Cutting tool part no. 276275
*or equivalent
Procedure To remove the oil filter the following steps are necessary:
Step
Procedure
1
Remove used oil filter with oil filter wrench.
2
Clean the contact surface of the oil pump housing with a clean cloth.
12–20–00
Page 32
December 01 2023
Effectivity: 916 i A / C24
Edition 0/Rev. 1

BRP ROTAX 916 i A Series Specifications

General

Brand	BRP
Model	ROTAX 916 i A Series
Category	Engine
Language	English