BRP ROTAX 916 i A Series Maintenance Manual

BRP-Rotax
MAINTENANCE MANUAL LINE
MAINTENANCE CONCEPT
General note The maintenance functions detailed in this Manual are divided into two categories:
• Maintenance I (Line Maintenance)
• Maintenance II (Heavy Maintenance)
Repairs beyond the levels detailed in Manual I and Maintenance Manual II are not recom-
mended as maintenance functions and must be in accordance to the current Overhaul
Manual (OHM) for the respective engine type. Overhaul Manual (OHM) and its appendix
is available for any appropriately rated person or entity on request and by following the
standards of the original manufacturer.
Maintenance I
(Line
Maintenance)
Chapter 00,05 and 12
The scope of line maintenance consists of servicing and adjustment of engine compo-
nents (including part wear). All procedures in this Manual are to be considered line
maintenance.
NOTE
Where applicable, you will be referred to the Maintenance Manual Heavy (MMH)
for work above and beyond line maintenance.
Maintenance II
(Heavy
Maintenance)
Separate Manual.
Maintenance Manual II details removal, installation and repair of components or parts nor-
mally considered beyond the scope of "Line Maintenance".
NOTE
This Manual can only be used in combination with Maintenance Manual I (Line
Maintenance), as it builds upon it.
00–00–00
Page 14
December 01 2023
Effectivity: 916 i A / C24
Edition 0/Rev. 1

BRP ROTAX 916 i A Series Specifications

General

Brand	BRP
Model	ROTAX 916 i A Series
Category	Engine
Language	English