BRP ROTAX 916 i A Series User Manual

10) Proper disposal
ENVIRONMENTAL NOTE
Please observe the disposal regulations applicable in your
area.
General
All old/used parts, liquids and chemical agents should be
disposed of according to local ordinance regulations.
Packaging
The disposal of the packaging is the customer's
responsibility and has to take place in accordance with the
current regulations of the country in which it has been removed.
Liquids
• Engine oil:
Dispose of engine oil at the respective oil collecting point or
hand it over to an approved disposal company
• Coolant:
Dispose of coolant at the respective collecting point or hand it
over to an approved disposal company
• Fuel:
Dispose of fuel at the respective collecting point or hand it
over to an approved disposal company
m WARNING
Flammable material must be placed at a sufficient distance from all
sources of ignition, direct and strong sunlight, spotlights and heating
devices, so that it cannot be ignited by such items.
ENVIRONMENTAL NOTE
Observe the safety instructions of the manufacturer of
hazardous substances (coolant, oil or fuel) and the applicable
regional waste disposal regulations.
ENVIRONMENTAL NOTE
Work with the utmost care to ensure that no water pollutants
can penetrate into the soil, water or the sewerage system.
Effectivity: 916 i A / C24
Edition 0 / Rev. 1
BRP-Rotax Page 10-1
December 01 2023

BRP ROTAX 916 i A Series Specifications

General

Brand	BRP
Model	ROTAX 916 i A Series
Category	Engine
Language	English